THE MFI5-48 A MOTORIZED FURNACE INSPECTOR

THE MFI5-48 A MOTORIZED FURNACE INSPECTOR

1:31 PM

DESCRIPTION

The MFI5-48 is an autonomous tether-free device that utilizes the magnetic flux leakage system (MFL) non-destructive evaluation technique to inspect furnace tubing down to 5 inches inner diameter (ID). Its geometrical features enable it to traverse one-diameter (1-D) bends of 90° and 180°, and support up to ±10% of ID variation. In addition, while operating it keeps track of its location and stores the inspection data onboard. All data can then be downloaded from the tool after it exits using a USB port for analysis, defect mapping and reporting. 

FEATURES 

Defect Detection

  • The MFI5-48 is capable of locating welds and detecting defects such as: corrosion, pitting and wall thinning
  • he tool has  navigation sensors for  tracking its position and locating defects

Geometrical Abilities

  • Support 1-D bends of 90 and 180 degrees
  • Accomodate up to ±10% of internal diameter variation
  • Overcome build up remaining on pipe wall

Resolution

  • Sub-millimeter spatial resolution along pipe axis (up to 0.7mm)
  • Sensor ring consisting of a minimum of 48 pairs of MFL sensors

Operational Specifications

  • The MFI5-48 traverses at 6 inches/second
  • It  is sealed and therefore, resistant to splashing water

Transforming research into innovation by ITRobotic
Next
« Prev Post
Previous
Next Post »